Intergraph TDZ 2000 GX1, Справочное руководство системы

Страница: 41 / 70

31
See the following for related information and important details:
u
System Board Manual for details on SCSI connector locations and pinouts.
u
Chapter 5, “Peripherals,” for details on drive locations, jumpers, and cables.
u
Chapter 6, “Power Supply and Cooling Fans,” for details on power supply cable
connectors and pinouts.
Remember the following when installing devices in the system’s drive bays:
u
If you are installing a SCSI drive, have the vendor’s documentation available to follow
instructions for setting the SCSI ID, enabling or disabling termination, installing device
drivers when required, and configuring other drive attributes.
u
If you are installing a drive that connects to an adapter card (such as an EIDE drive), see
the vendor’s documentation for installing the adapter card and required cables. See the
“Adding Expansion Cards” section above for details.
u
If you are installing a removable disk drive module, see the vendor’s documentation for
installing the module, removing terminators, and setting the SCSI ID.
NOTE Internal SCSI drives are not terminated. The internal SCSI cable provides termination. You
must disable termination on any drive that you install in the system.
Device Locations
You can add optional mass storage devices to the internal and external drive bays. The
following table provides the drive locations and related information. See the figure below.
Location Drive Bay Type Bay Capacity SCSI ID
1 CD-ROM External 5.25-inch x 1.6-inch —
2 Floppy drive External 3.55-inch x 1.0-inch —
3 Add-on device External 5.25-inch x 1.6-inch 4
4 Add-on device External 5.25-inch x 1.6-inch 3
5 Add-on disk drive Internal 3.5-inch x 1.0-inch 2
6 Optional disk drive Internal 3.5-inch x 1.0 or 1.6-inch 1
7 System disk drive Internal 3.5-inch x 1.0 or 1.6-inch 0
NOTE You can install a total of three 3.5-i nch x 1.0-inch drives or a total of two 3.5-inch x 1.6-inch
drives in the internal drive bay.
The following figure shows drive locations. Devices are installed in all locations for figure.
The CD-ROM, floppy drive, and system drive are standard. Other devices are available as
options.