manualshive.com logo in svg

Intergraph TDZ 2000 GX1, Справочное руководство системы, Страница: 11 / 70

Поделиться
Скачать
Intergraph TDZ 2000 GX1 Скачать руководство пользователя страница 11

1

1 

Accessing the System

The TDZ 2000 GX1 features an extensible chassis architecture designed for ease of upgrades
and expansion.  The design provides easy access to AGP, PCI, and ISA card slots, memory,
processors, and power supply.

This chapter lists hand tools and describes servicing restrictions, methods for avoiding
electrostatic discharge, and how to remove and attach cover panels.

Before You Begin ..........................................................................................................2
Tools .............................................................................................................................2
Protecting Against Electrostatic Discharge .....................................................................2
Opening and Closing the Case .......................................................................................3
System Components.......................................................................................................5

Содержание TDZ 2000 GX1







































































Отзывы:

Нет отзывов