Intergraph TDZ 2000/ExtremeZ, Руководство пользователя

Страница: 6 / 10

4
supply to finish starting the first drives. See the disk drive documentation or the disk drive label
for information on activating delayed start.
Windows NT 4.0
Ethernet Network Setup and Configuration
On a system equipped with an Ethernet network adapter, note the following:
♦
Network adapter driver software is preinstalled. Operating system Setup no longer prompts
you to install networking.
♦
Core network software and the NetBEUI network protocol are preinstalled. If you want to
connect the system to another type of network (such as TCP/IP), you must add the appropriate
network protocol using the Network applet in the Control Panel. Reinstall the appropriate
Windows NT 4.0 Service Pack software after making such changes, as recommended by
Microsoft.
Enabling PC Card Hard Disk Operation
Intergraph Computer Systems has found a resource conflict that keeps a PC Card hard disk (ATA
or AT type) from being configured by Windows NT. To work around this conflict and enable
operation of a PC Card hard disk in a PC Card adapter, you must edit the Windows NT Registry.
WARNING Be careful when making changes in the Registry. Any mistakes or incorrect
changes may cause serious operating system problems, and you may have to
reinstall the operating system. If the system becomes unusable after you have
modified the Registry, restart the system and try to use the Last Known Good
configuration option to undo the damage. See Windows NT documentation for
more information on the Last Known Good configuration option.
To enable PC Card hard disk operation:
1. Start the Registry Editor (
REGEDT
32.
EXE
) to open the Registry.
2. Open the following subkey in the Registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Pcmcia
3. From the Edit menu, select Add Value.
4. In the Value Name box, type InterruptMask.
5. In the Data Type box, select REG_DWORD; then select OK.
6. In the Data box, type F347.
7. Under Radix, select Hex; then select OK.