2
System Base Unit
The base unit slide rails (attached to the rack) and rail guides (attached to the system) slide
across each other and lock into position when pulling the system out of the rack. Press in the
release tabs to allow the system to be removed from the rack. The following figure shows the
release tabs on the rails.
Slide Rail
Rail Guide
Release Tab
Keyboard Tray
The keyboard tray uses a release tab on either side of the tray. Press in the release tabs to
allow the tray to retract.
Prepare for Windows NT Setup
The operating system and associated system software is pre-installed on the system’s hard
disk. Intergraph installed the following system software:
u
Driver software for the on-board SCSI adapter
u
Driver software for the on-board networking adapter
u
Driver software for the installed graphics accelerator
u
Operating system network software (TCP/IP and NetBEUI)
u
StudioZ software
