Intergraph InterServe 205 PrePress, Настройка системы

Страница: 9 / 12

7
System Software Product Windows NT 4.0 IBBS
InterSite Hardware Monitor utility
HWMON
_TD220 -
InterSite Manager utility
IM
-
InterSite DMI utility
DMI
-
InterSite Watchdog utility
WATCHDOG
-
Quick-Fix Engineering Software
QFE
_NTS -
BIOS/flash programming utility -
FLASHPROG
System Introduction
RNDSYSIN
-
System Reference -
RND
225
REF
NOTE When installing the G76 video display driver from the Windows NT CD-ROM, note that the driver is
listed as an “S3 732/764/765 compatible” driver.
Follow the instructions in Start Here to install Windows NT Server. As you install the operating
system, select the default responses during the Setup process, except for the following:
u
On single-processor TD-225 systems, when prompted, select “Standard PC.” This will load the
single processor kernel and HAL, providing better performance.
On dual-processor TD-225 systems, select MPS Uniprocessor.
u
After reading the End-User License Agreement (EULA), press
F
8 to accept it.
u
Allow Setup to configure the network only if you have an installed network adapter, and then
only if the system is connected to the network.
u
Create an Emergency Repair Disk when prompted.
After installing the operating system and restarting the system, do the following:
u
Install drivers or other system software from any backup diskettes. System software delivered on
backup diskette is usually more current than system software on the operating system CD-ROM.
Alternatively, you can install the drivers or other system software from the Windows NT Setup
files in the
C
:\
I
386 directory, or on the Windows NT CD-ROM, if you do not have them on
diskette.
u
If you created a Quick-Fix Engineering (QFE) backup diskette, install the QFE update software if
desired. Refer to the
README
.
TXT
file on the QFE diskette for more information.
u
Configure Services for Macintosh as described earlier in “Installing and Configuring Services for
Macintosh.”
u
Configure the system as described in “Configuring the System” in the System Guide .
u
Perform any additional installation and configuration tasks described in the Late-Breaking News
document delivered with your system.
u
Refer to “Operating Notes” in the System Guide for additional tasks you may want to perform
after reinstalling the operating system and associated system software.
Disabling Command Queuing
To improve standalone system performance and to improve performance with some high-performance
SCSI peripherals, you should disable command queuing in the Windows NT Registry.