Intergraph InterServe 205 PrePress, Настройка системы

Страница: 10 / 12

8
WARNING Do not change values in the Registry other than as directed. If you introduce incorrect values
into the Registry, you may cause serious operating system problems, and you may have to
reinstall Windows NT. If you change values in the Registry that make your system unusable,
you may be able to restart the system and use the Last Known Good Configuration option to
undo the damage. Refer to the operating system documentation for more information on the
Last Known Good Configuration option.
To disable command queuing:
1. Start the Registry Editor (
REGEDT32
.
EXE
) to open the Registry.
2. Open the following subkey in the Registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\aic78xx
3. From the Edit menu, select the Add Key.
4. Type Device into the Key Name box, and then select OK. Do not set a Class value.
Open the following subkey in the Registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\aic78xx\
Device
5. From the Edit menu, select Add Value.
6. Type DisableTaggedQueuing into the Value Name box.
7. Select REG_DWORD for the Data Type, and then select OK.
8. Type 1 into the Data box.
9. Set the Radix value to Hex, and then select OK.
10. Exit from the Registry Editor and restart the system.
Installing the Ensoniq Sound Processor Driver
Systems with an audio option include an Ensoniq sound card. The Ensoniq sound card is delivered
with a software CD-ROM that contains driver software, wavetable and mixer software, and online
documentation for installing and using the sound card. However, the online Ensoniq documentation
does not describe how to install the software on a system running Windows NT 4.0 -- for example, if
you must reinstall the operating system, or if you add a system audio option.
To install the Ensoniq driver, wavetable, and mixer software:
1. Insert the Ensoniq software CD-ROM into the system’s CD-ROM drive.
2. In the Control Panel, open Multimedia.
3. In the Multimedia Properties dialog, click Devices (tab); then click Add.
4. In the Add dialog, in the List of Drivers, click Unlisted or Updated Driver; then click OK.
5. In the Install Driver dialog, type the path to the Windows NT software on the CD-ROM; then
click OK. The Windows NT software can be found on the CD-ROM at \winnt\ language \cd ,
where language is the language of the operating system (for example, english ).
6. After the software has been installed, in the Add Unlisted or Updated Driver dialog, select
Ensoniq AudioPCI; then click OK.
7. When the configuration dialog displays, click OK to accept the default settings.
8. In the Multimedia Properties dialog, click OK.