Intergraph ErgoView DFED3607M, Руководство по установке, Страница: 6 / 24

2
2 Unpacking the Digitizing Table and Base
The digitizing table and base are shipped already assembled together. If your installation site has an
existing digitizing table with an Intergraph Computer Systems or Hamilton table base, go to
“Unpacking the ErgoView Stand.”
WARNING To avoid injury, stand to the side when cutting the package banding.
CAUTION Do not penetrate packaging with sharp instruments.
1. Carefully cut the package bands around the box and pallet. See the following figure.
2. Lift the box off the pallet.
3. Remove the plastic wrap from the table base.
WARNING The digitizing table is top-heavy and can tip over while locked in a vertical position.
4. Using a socket wrench with a 9/16-inch socket, remove the hex head bolts that secure the table
brackets to the pallet.
Ramps
Table
Bracket
Table
Bracket
Bands
5. Unlock the table tilt mechanism (located underneath the table) by moving the handle of the tilt
mechanism towards the center of the table. Rotate the digitizing table to a horizontal position.
6. Lock the table in the horizontal position by moving the handle of the tilt mechanism towards the
outside of the table. Remove the table brackets.