Interface MCA-E4852A, Руководство пользователя

Страница: 18 / 21

MCA-E4852A Ver. 1.1
Interface Corporation -16-
Chapter 8 Troubleshooting
8.1 Checkpoints
Problem Solution
Double-check all cable connections.
Set up your equipment to meet the timing characteristics of this board, such
as data setup time, and input/output response time. Data cannot be transferred
correctly.
If the power requirements exceed the system power budget, the circuits on
the board or connected external circuits cannot be driven properly. Prepare
an external power supply for your PCI board.
Communications are not
reliable. Transmit/receive
errors occur. Check whether the selected terminating resistor is suitable for your system.
Refer to “3.4 External Input/Output Circuit,” page 8.
The computer does not
recognize this board. Use the PCI device viewer (BPF-0801) to examine the CardBus card board
on your computer. Please send the result to our Technical Support Center
by fax or e-mail. The PCI device viewer may be downloaded from our Web
site free of charge.
The computer does not
response after Standby mode.
(Input and output are
disabled.) Set the System standby setting to “Never”.