background image

Overview

ETP-08R is an all-in-one 8-port Ethernet over 2-wire receiver and 
Hybrid switch that simultaneously transmits network data and supplies 
PoC power at high speed and long distance via 2-wire Twist cable, while 
also supporting existing Ethernet and PoE converters that can transmit 
IP data and PoE power for short and long distances.  
Using of your existing analog cables (UTP, 2-wire), network cameras 
are easy to install and it is a cost-effective and time-saving solution 
to migrate from an existing analog system to an IP-based system. 
The long-distance transmission feature of this device makes it easy 
to overcome the usual 100m-distance limit, and combined with 
the HPS-01 switch, transmission can be extended up to 250m at a 
maximum speed of 100Mbps. Two power supplies are included for 
redundance and power sharing. 

Features

 



Simultaneous use of regular Ethernet and Power over 2-wire

 



Ethernet extension over existing 2-wire Twist cable 

 



Data + Power over 2-wire cable (PoE, PoC)

 



Data up to 300m over 2-wire 

 



100Mbps Full Duplex over 2-wire

 



PoE, PoE+, Extra PoE (Max. 60W Output) – Use of additional power 
adaptor

 



Quality LED (Data, Power)

 



Plug & Play

 



Surge Protection

 



10/100/1000 Base-T Ethernet (Full Duplex) 8+2 Hybrid PoE Switch

 



8-port PoE (IEEE802.3af standard) / PoE+ (IEEE802.3at standard)

 



Extended Ethernet distance up to 250m (10/100 Base-T Ethernet 
standard / With the HPS-01 switch)

 



19” Rack

Quick Start Guide

ETP-08R

Please read carefully the instruction manual before use. Depending 

on the model, the image and the actual look of the product may vary. 

Package

ETP-08R

Bracket

Quick Start  

Guide

Rev.1.0

Hardware Overview

❶  

RJ45

:  

10/100/1000 Base-T Ethernet Port 
/ 8 ports PoE+ (IEEE8002.3af/at – 
Max.25.5W)

❷  

RJ45 Uplink

10/100/1000 Base-T Ethernet Uplink 
Port

❸  

DC IN

DC Input ports (up to 57V DC input)

❹  

POWER

 : 

Recommended use: 100-240V ~ 
50/60Hz2.0A

❺  

PORT

:  

Each port of the ETP-08R connects to 
an ETP-01T via 2-wire cables

❻  

Bracket Holes

:  

Used to fix the product to the rack

Applications

DC 57V (When using PoE 

DC48-57V adapter  applied)

NVR

Max. 100m

HPS-01

PoE

Camera

Max. 250m

Max. 100m

PTZ IP PoE

Camera

PoE Camera

PoE/Non-PoE Switch

ETP-08R

PoE

Camera

ETP-01T

PoE

Camera

ETP-01T

PoE

Camera

ETP-01T

Front

Front

Back

Side

 

POWER

 RJ45

❷ RJ45 Uplink ❸ DC IN

❻ Bracket Holes

❺ 

PORT

Отзывы: