6
Interchange Brands, LLC
Pneumatic Carton Closing Staplers
Model No. SAB100-A
& SAB150-C
Loading the Tool
Check Staple Leg Length
1.
Disconnect the air supply .
2.
Pull pusher back until it stops on pusher
pivots then rotate pusher to position for
loading staples .
3.
Insert 2 sticks of appropriate staples into
the magazine from the back . Let the sticks
slide forward to the front of the magazine .
4.
Pull pusher back to upright position and
gently let the pusher slide forward against
the staples . Do not let the pusher slide
forward and strike the staples at high
speed as this may deform the staples or
damage the tool .
1.
Disconnect the air supply .
2.
Loosen set screw with 3mm hexagon
wrench key .
3.
Turn adjusting rod 180° with a
screw driver to the desired adjustment .
4.
If you want to shoot 3/4" / 18mm leg
staples, position “L” on the adjusting rod up .
5.
If want to shoot 5/8" / 15mm leg staples,
position “S” on the adjusting rod up .
6.
Tighten set screw .
Operating Instructions
1
2
3
4
2
3
STAPLE
LENGTHS
ROD
POSITION
4 & 5
6
1
