11
Interchange Brands, LLC
Pneumatic Carton Closing Staplers
Model No. SAB100-A
& SAB150-C
1.
Disconnect the air supply .
2.
Remove the magazine unit with flat
head screw driver .
3.
Loosen screw with 4mm hexagon
wrench key .
4.
Remove the magazine seat .
5.
Loosen screws with 3mm hexagon
wrench key . Change teeth one
at a time to prevent reversing the
direction of the teeth .
5
4
Driver Replacement
1.
Disconnect the air supply .
2.
Take off the magazine unit with
flat head screw driver .
3.
Loosen screws with 4mm
hexagon wrench key .
4.
Remove the magazine seat .
5.
Loosen set screw with 3mm
hexagon wrench key to unlock
adjusting rod .
6.
Slide linkage mechanism and
adjusting rod simultaneously from
collar .
7.
Loosen screws with 3mm
hexagon wrench key .
Take off the spring pin with
hammer and 6mm straight rod .
2
3
1
4
5
6
7
Teeth Replacement
Tool Maintenance
3
2
