Interactive Technologies Commander 2000, Руководство пользователя

Страница: 18 / 61

18
Arming and Disarming Your System
This section describes levels of security and how to arm and disarm the system.
Turning System Off
Use level 1 ( OFF ) to turn the system off when entering the premises with the sys-
tem armed to level 2 or 3 and when canceling an accidental alarm. Level 1 dis-
arms your perimeter and interior sensors. The 24-hour sensors (such as smoke,
heat, freeze, emergency buttons, and fire pull stations) always remain armed.
CAUTION: Do not enter the premises if you hear sirens. Call
for emergency help from a neighbor’s phone.
■
To disarm the system from the panel or a Handheld
Touchpad:
1. Enter the premises through a delay door when the system is armed to level 2
or 3.
The panel and interior sirens sound entry delay beeps for the entire delay or
until you disarm the panel. You must disarm the system before the delay
time expires, or an alarm occurs.
CAUTION: Exit the premises immediately if the entry delay
beeps sound at a more rapid pace. This indicates
an alarm has occurred. Call for emergency help
from a neighbor’s phone.
2. Enter ACCESS CODE + 1.
The AWAY or STAY light turns off, and the panel and interior sirens sound
an arming level beep, and the panel announces,
Alarm system is OFF,
if you
disarmed from the panel.
CAUTION: If you disarm the system before entering the
premises, do not enter the premises if you hear
protest beeps. This indicates an alarm has
occurred. Call for emergency help from a
neighbor’s phone. For more information on this
feature, contact your security consultant.
3. Press STATUS to learn if there are any system problems.
1
OFF
Technical Manuals Online! - http://www.tech-man.com