interactive scape Scape Movable smo43-005, Руководство по эксплуатации

Страница: 16 / 33

4. Switching on
—
Scape®
Movable Technical specifications are subject
smo43-005 to change without notice.
Operating Manual Version 1.6 – Status: 12/2019
Page 16 of 33 poc: SFi
4. Switching on
Switch on the display using the main switch (see Chapter
2.2.4 – Touch screen – item 16
). Then start the PC (see
Chapter 2.2.3 – Integrated PC – item 1 ).
Make sure that there are no objects on the display when the
device is switched on.
Do not touch the touch screen during device startup, otherwise
there will be errors in the touch and object detection.
The device will take about 1.5 hours to power up before it reaches its final operating temperature. During this time, the
touch sensor of the device constantly adapts to its environment. This has a direct effect on long-term object
recognition.
If your application requires the Capore® objects to remain on the
screen for a long time, do not use object detection until the
device has reached its operating temperature.