2. Specifications and set up
—
Scape®
Movable
Technical specifications are subject
smo43-005
to change without notice.
Operating Manual
Version 1.6 – Status: 12/2019
Page 11 of 33
poc: SFi
2.2.2.
Lift remote
On the
Scape® Movable
you can set the height of the screen as well as its inclination. Press the Mode button (
4
) to
switch between the Height Adjustment (
Mode 1
) and Tilt Adjustment (
Mode 2
) modes. The display (
8
) will show you the
respective number after changing the mode. Now set the desired height or tilt of the screen using the position moving
buttons (
2
&
3
).
You have the possibility to save 2 positions and recall them later. Adjust height and inclination as desired. Press the
memory button (
7
) for 3 seconds and then select the desired memory location I (
5
) or II (
6
).
To return to the stored position later, press and hold the button for the corresponding memory location until the screen
is in the stored position.
Make sure that there is enough space around the device and that
the device does not touch anything during the procedure.
Do not touch the lift frame during the procedure!
During the procedure, touch the device only at the control
element.
2
Raise height (mode 1) & - move to the vertical (mode 2)
3
Lower height (mode 1) & - move to the horizontal (mode 2)
4
Switch modes
5
Preset 1
6
Preset 2
7
Set presets
8
Display
2
3
4
5
6
7
8
Содержание Scape Movable smo43-005
Страница 1: ...Scape Movable smo43 005 Operating Manual ...
