Inter-Track IT-B240, Руководство пользователя

Страница: 8 / 14

4. A . Insert the heart Pulse sensor (No.12) through the side hole on
the Handlebar support (No.7) and through the upper end; Then cover
the heart rate line (No. 18) with the threading hole plug (No.38), plug
the hole on the Handlebar support (No.7), and then cover the hand
handle bar (No.8) in the clamping tube hoop on the Handlebar
support (No.7), as shown in the figure, then cover the handle decorative
cover (No.34) and the spacer sleeve (No.35), and lock it with the T-knob
(No.36).
B
. Connect the electronic meter (No.11) and heart rate wire (No.16) to the
corresponding connector of the electronic meter, and then put the extra wire
plug into the Handlebar support (No.7); Then the convexity of the electronic
watch is set to the welding seam of the forehand connector, the upper end of
the electronic watch is fixed to the Handleb ar support (No.7), and is fixed with
the Cross Recessed Pan Head Screw (No.64).
Note: the clamping teeth on the hand bar (No.8) must be consistent with
the clamping groove of the tube hoop of the Handlebar support (No.7).
5. With 3 sets of Locknut (No.6 1), Spring Washer (No.59) & flat washer
(No.58) install the seat cushion (No.19) on the seat cushion adjustable
bracket (No.40).
6. A.Then insert the seat bracket (No.15) into the D - shaped transition sleeve (1No.24),
insert the seat bracket (No.15) into the seat support pipe of the Main frame (No.4),
and align the upper end rotary hand seat hole of the seat support pipe of the Main
frame (No.4) with a certain hole on the seat bracket (No. 15); Then insert the Spring knob (No.25) into the hole and
tighten. (See Figure 6)
B .Put seat cushion adjustable bracket (No. 40) on the upper end of the seat bracket
(No.15) according to the direction Shown in the figure.After adjusting a certain position,
tighten the seat cushion with shot knob (No.39).