Inter-m VAMS-0808, Руководство по эксплуатации

Страница: 10 / 16

8
VAMS-0808
VIDEO AUDIO MATRIX SWITCHER
Using the Matrix
Using the Matrix
- POWERING THE MACHINE
Connect the AC CORD which is involved in the carton box with the “~AC INPUT” located on the rear of the
machine.
Plug the AC CORD to the power source (220V/60Hz or 230V/50Hz), then turn on the power switch
located on the front panel of VAMS-0808.
If the connection is correct, the green light of power switch will be turned on.
- USING THE CONTROL SWITCH OF THE FRONT PANEL
1. SELECTING AN OUTPUT
To select an output, press one of the number of OUTPUT switch button.
For example, to select output NO1, press output switch button NO1 of the front panel.
At this time, status display NO1 located on left of the front panel is blinked for 10 seconds approximate-
ly.
Like this, any outputs can be selected.
These buttons correspond to output connectors as marked on the rear panel of VAMS-0808.
2. SELECTING AN INPUT
To select an input, press one of the number of INPUT switch button.
For example, to indicate input NO1 to output NO1, press output switch button NO1 and select input
switch button NO1 when status display NO1 is blinked. Then the blinking of the status display is
stopped and input NO1 is selected.
These buttons correspond to input connectors as marked on the rear panel of the machine.
3. SELECTING A VIDEO
Only to control a video, press VIDEO switch button. Confirm that the green light of the video switch
button is turned on.
4. SELECTING A AUDIO
Only to control a audio, press AUDIO switch button. Confirm that the green light of the audio switch
button is turned on.
5. SELECTING A VIDEO/AUDIO
To control a video and audio simultaneously, press A/V switch button. Confirm that the green light of
the A/V switch button is turned on.
OUTPUT
INPUT
1 2 3 4 5 6 7 8
ALL OFF A/V VIDEO AUDIO LOCK
1
6
7 5 3 4
2
8