NETWORK SYSTEM REMOTE MIC STATION
5
RM-N3000
6. MENU / PRESET / PREV / NEXT / CHIME / ALL BUTTON
1) MENU / PREV: You can use MENU / PREV to select the setting menu or return to the standby screen.
2) PREV/NEXT: If there are 8 or more numbers registered in the Number Input screen, you can use PREV
/ NEXT as a Scroll button.
3) CHIME: You can use this button to activate a CHIME that signals the beginning or end of a
broadcast. Refer to the 4. Chime Set on page 16 of this manual for detail information about the
CHIME settings.
4) ALL: This button is used to select all the broadcasting areas.
5) PRESET: If you select PRESET from the standby screen, an “Invalid Function” message will appear on
the screen.
7. LED INDICATOR
You can check the output level through the level meter.
8. POWER AND COMMUNICATION LED INDICATOR
It is the LED that shows the power status and communication status. The power LED is lit when power is
applied, and the communication LED is lit to indicate Primary/Secondary operating status.
9. MONITOR / AUX / CHIME VOLUME
This volume controls the MONITOR/AUX/CHIME output.
