NETWORK SYSTEM REMOTE MIC STATION
10
RM-N3000
1) The Request screen will appear when you enter the desired Number to broadcast and select the Talk Key.
2) If the device is not registered as a source device on MS-N300, the Talk screen will appear for 10
seconds, then return to the standby screen.
The Talk screen will appear when the device operates correctly as a registered source device.
3) You can modify the MIC Mute On/Off settings by using the * key.
4) You can modify the AUX Mute On/Off settings by using the # key.
5) You can’t set Mute as On for both MIC and AUX at the same time.
6) According to the talk type during the broadcast, when the Talk button is operated, the standby screen is
switched after the broadcast ends.
※
For information about setting the talk type, refer to page 14 of this manual.
3. INPUT SHORTCUT BUTTON: FUNCTIONS AS SHORTCUT KEYS FOR INPUTS.
1) The 1 ~ 5 key on the front left side of RM-N3000. Press the 1 ~ 5 key to corresponding number is input.
2) The following screen is displayed when selecting key 1 of left 1 ~ 5 keys.
+3dB
