NLM-8000C
Local Machine
1) When the device is in sleep mode, Led On/Off can
be set.
2) When ON is selected, Led is on in case it is
changed to sleep mode.
3) Select OFF if you want to turn OFF Led when it is
in sleep mode.
- Factory Reset
1) The device can be factory initialized.
2) If selection switch is pressed for 5 seconds or
longer under the state Factory Reset? Phrase is
displayed, Factory Reset!!! Phrase is displayed and
the status displaying LED blinks three times.
3) Factory Reset is completed and is re-booted automat-
ically. Reset ID of the device to the usage purpose to
use.
3. Volume Mode, Channel Mode Changing Method
1) If selection switch is pressed for 2 seconds or longer
on the Volume Mode screen, Chanel Mode phrase is
displayed, if the selection switch is unhanded under
this status, it is converted into Chanel Mode. In turn,
if the selection switch is pressed for 2 seconds or
longer on Chanel Mode screen, Volume Mode phrase
is displayed, and if the selection switch is unhanded
under this status, it converts into Volume Mode.
4. Volume control
1) If the switch is turned on the Volume control screen,
the Volume of channel selected at present can be
controlled. Please refer to the 4. Channel selecting
explanation for the way of selecting the channel.
2) Turn the selection switch counterclockwise and the
present Volume is reduced, and it can change to 0
at least.
3) If the selection switch is turned clockwise, the present
Volume is increased, and it can change up to 100
at largest.
4)If the selection switch is pressed, the present
Volume is Muted. When it is Muted, Mute phrase
is displayed at the center of the screen, and when
controlling the Volume, Mute phrase is displayed at
the left bottom.
5) If the selection switch is pressed again, Mute is
cancelled.
※ On the Channel or Setting screen, Mute cannot
be set with the selection switch.
6) In case the point of contact is inputted with MUTE
terminal at the back of NPX-8000, Music Mute
Contact In phrase is displayed, Music Mute phrase
is displayed at the bottom of the screen. The control
of device is possible at this status, but an audio
signal is not outputted at NPX-8000.
5. ChanneL SeLeCTIOn
1) You can move to the input channel you want mixing
by turning the switch on the Channel selecting
screen.
2)After moving to the channel desired, press the
selection switch and you can select input channel
to be mixed.
3) If the input channel to be mixed is selected, it is
checked V at the Check Box.
4) In case of cancelling the Mixing Channel, if selection
switch is pressed after selecting the channel to cancel,
V of the Check Box disappears, and the pertinent
channel is cancelled.
※ In case an input signal with higher priority than
BGM is broadcasted (EXT Contact, RM 1, RM
2~8, Schedule, Input Contact), Volume control
and Channel selection cannot be done.
Factory Reset?
Volume
100
Chanel
Mode
OUTPUT 1
INPUT 1
INPUT 2
INPUT 3
Volume
Mode
Factory
Reset!!!
Volume
100
Volume
100
Mute
OUTPUT 1
INPUT 1
INPUT 2
INPUT 3
OUTPUT 1
INPUT 1
INPUT 2
INPUT 3
Music
Mute
Contact In
Volume
70
Music Mute
