Inter-m DSR-1608 Скачать руководство пользователя | Manualshive

Страница: 6 / 84

background image

DIGITAL VIDEO RECORDER

Safety Notice

Safety Notice

1. Precautions before installing the system

- Disassemble the packing and then place the system on a dried and plain floor.
- Install the system a place where it ventilates well.
- Keep away electromagnetic waves or a strong magnetism (for example, speaker, etc.) from your

installing place.

- A place where it sun shines directly or it is near to heating device is not suitable for your installing place

in order to protect the system against direct sunlight or strong heat.

- A place where it is exposed to outdoor or it is cold is not suitable for your installing place.
- Be careful that you will not be injured from an installing tool or equipment on the installing place.
- A place where it has strong vibrations or a high relative humidity is not suitable to install the system.
- Check up the voltage before connecting to power cord.
- Dispose the vinyl pack after disassembling the packing. (Keep away from children, if a child puts on it

on the head, it will be vary dangerous.)

2. Cautions in use of the system

- If you disassemble the system to repair, in some cases, you may not be available to get a repair and

maintenance. Therefore, you should contact your distributor when the system will get out of order.

- Before using the system, please read this manual thoroughly.
- If you disassemble the system, you may not be available to get an after sales service. You should con-

tact the customer support center when the system will get fault.

- Do not touch an electric outlet or power cord with your wet hand.
- Pat attention that power cord shall be plugged in electric outlet correctly.
- Do not wipe the system with a alcoholic substance such as thinner or benzene.
- Do not touch any terminals being exposed to the exterior.
- Operate the system in a place where it ventilates sufficiently.
- Do not disassemble or repair the system arbitrarily.
- Do not put a heavy object on the system upper part.
- Do not move the system while operating it.
- A repetition of power on and off without system off during an operation may damage the HDD.
- When the system gives out fumes or odor immediately switch off the power supply and then contact

your distributor to get a technical support and repair and maintenance.

2

DSR-815/1608

6

Before getting started:

Before getting started:

The Operating Instructions incorporate the methods for operating or configuring the DVR system.(hereinafter
referred to as “the system”) And the programs. Before using the system, please read this manual thoroughly.
After disassembling the packing, please confirm the parts and contact to your distributor if you may have a
question. Cautions on safety (You must check up the following articles.)

«
...
4
5
6
7
8
...
»

Содержание DSR-1608





















































































Отзывы:

Нет отзывов

Похожие инструкции для DSR-1608

Бренд: Dali Страницы: 78

Бренд: inforce Страницы: 78

Бренд: ZMODO Страницы: 28

Бренд: XtendLan Страницы: 148

Бренд: Safe N Secure Страницы: 36

Бренд: Planet Страницы: 95

Бренд: COP-USA Страницы: 39

Бренд: COP-USA Страницы: 82

Бренд: COP-USA Страницы: 93

Бренд: Hauppauge Страницы: 2

Бренд: GE Interlogix Страницы: 48

Бренд: Delton Страницы: 26

Бренд: CBC Страницы: 67

Бренд: 8 Level Страницы: 39

Бренд: Super Circuits Страницы: 60

Бренд: Tronios Страницы: 65

Бренд: HIKVISION Страницы: 12

DS-7300HFI-ST Series

Бренд: HIKVISION Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды