Inter-m DSR-1608, Руководство по эксплуатации

Страница: 32 / 84

DIGITAL VIDEO RECORDER
32
DSR-815/1608
1) Enable : It sets up whether to use event server or not. (On : Use, Off : Not Use)
(If you want to utilize an event service, set up it On.)
2) Server IP : It sets up an address of the computer where the agent view program was installed.
3) Server Port : It sets up a service port.
4) Interval(Sec) : It sets up a time interval to notify an event.
* Refer to “agent view” section. (Refer to page 64.)
2-6. System Setup.
: It sets up system information, password, date/time, pan tilt, system upgrade, etc.
On the configuration screen as shown in <Fig. 1>, click on “System”.
[use of the front key and the remote control : Select “Menu” button, displace to corresponding menu with
the lateral (
◀▶
) button, and then select “Enter” button.]
It sets up the system information of a DVR, whose sub systems are composed of 5 menus.
1. System information : It sets up a confirmation of system information and an initialization of system.
2. Password setup : It sets up to restrict an use of front key and to change passwords.
3. Date & time : It sets up system date,time, date type.
4. P/T/Z Setup : It sets up detailed information of Pan/Tilt camera.
5. System upgrade : It upgrades programs of the system.
2-6-1. System information : It indicates system information of the product and initializes the setting
values upon product production.
On the configuration screen as shown in <Fig. 16>, click on “System Information”.
[use of the front key and the remote control : Select “Menu” button, displace to corresponding menu with
the lateral (
◀▶
) button, and then select “Enter” button.]
<Figure. 16>
1
2 3
4 5