1- fix the screw
2- adjust the screw
3- airway tube
4- lens cone
5- For the lock cap, used to adjust the up and down and fixed
6- For the lock cap, inside is focusing mirror
7- For the outlet and laser output
8- air inlet
4.2
laser path adjust
Laser beam from the laser tube first shot at the center of the first mirror area (laser beam effect in the
center of the mirrors within the scope of + / - 5 mm).With acrylic or other transparent non-metallic
materials before the mirror, so we can see mirror through acrylic transparent or other non-metallic
materials, press some switch, let the laser diode laser, the laser will leave on acrylic transparent or
other non-metallic materials burn marks (dot), try to observe the position of the light effect on the
mirror, and then adjust the position of the laser tube light, laser from laser tube to hit the center of the
first mirror lenses.
1- laser power outlet
2- reflective mirror 1
Green line is the road of laser
WWW.INTERLASER.RU
22
