I N S T A L L A T I O N M A N U A L
Z O O M E R A N G ™ S L I D E
9
ZOOM-IM Rev. 9/09 (SBK-INSTAL ZOOM)
STEP FOUR:
Water Supply Hook Up
Kit contains: a length of 1-1/4” corrugated hose, (1) two part plastic fitting, and (2) plastic
clamps.
Wet one end of the hose and slide onto the
fitting on the underside of the flume (illustrated).
Secure with plastic clamp by pinching together the
interlocking teeth.
Turn off your filtration system before connecting
the other end of the hose to your pool return fitting.
Remove the collar that secures the directional
“eyeball” fitting in your pool return, located inside
you pool (example illustrated). There are many
variations of return fittings, however, the two
adapter fittings provided should fit your pool.
Hand Tighten Only!
You want to be able to
remove the hose fitting from your wall return
when your slide is not in use.
Slide the hose over the lipped flange of the
provided adapter fitting until the lip locks into the
corrugated hose. Attach the plastic clamp,
do
not over tighten!
You should be able to swivel
the adapter fitting inside the corrugated hose.
This allows for hand threading the adapter fitting
to the return and the removal of the adapter fitting
when the slide is not in use.
Turn on your filtration system and your
Zoomerang™ is ready for action!
