I N S T A L L A T I O N I N S T R U C T I O N S 1 5 ’ G R S S L I D E
12
GRS15-IM Rev. 9/18 (SBK-GRS15 INST)
IN-DECK INSTALLATION:
Attach slide legs to the higher of the 2 bolt holes on the deck anchor “hole B”, make a mark
with a marking pen or duct tape 4
1
⁄
4
” from the bottom of the deck anchor, shim the legs so
the mark you made on the deck anchor is flush with the finished deck, using a bubble level
ensure the legs are plumb. Pour concrete to secure legs, ensure the proper footing depth is
maintained under the deck anchor. (See Figure 11)
ATTACH WATER SUPPLY TO SLIDE:
Your Garden Ride Slide is equipped with a 1” Female Slip adapter. A dedicated 1½” water stub
up should be plumbed to your slide location. We recommend you plumb the slide with 1” PVC
flex hose using a reducer to connect to the stub up. For best performance, the
recommended water flow at the slide is 20-40 GPM.
Glue and slip the 1” PVC flex hose into the 1” female fitting on the underside of the Entry Section.
(See Figure 12) Use PVC primer and glue (not included) as required. A ball valve is recom-
mended to allow the water flow to be adjusted.
Fig. 11
9
3
⁄
16
”
Deck Line
Deck Anchor
Concrete
Deck
4
1
⁄
4
”
3”
3/4”
Fig. 12
