Inter-fab 15' GARDEN RIDE SLIDE, Инструкции по сборке/установке

Страница: 11 / 16

I N S T A L L A T I O N I N S T R U C T I O N S 1 5 ’ G R S S L I D E
9 GRS15-IM Rev. 9/18 (SBK-GRS15 INST)
Fig. 3 Fig. 4
Fig. 5
INSTALLATION GUIDE FOR 15’ GARDEN RIDE SLIDE
USING OPTIONAL SUPPORT SYSTEM:
The GRSS Optional Support System is to be used on a flat grade concrete surface; for in-deck
or on-deck installation. For a 15’ GRSS (both Left and Right turn) the recommended minimum
deck area: 12’ 3” x 9’ 10” x 4”
The Optional Support System is designed to easily orient the slide to ensure proper elevation
starting at the entry section 73
1 ⁄
8
” to the exit section at 12” above the deck.
PRE-ASSEMBLE FOOT RECEIVERS:
Attach a deck anchor to each leg support with a 2 ½” x ¼” stainless steel bolt, flat washer,
lock washer and nut as shown. (See Figure 6) Hand tighten only.
CONNECTING HANDRAILS:
Install the handrails (See Figure 5) for the correct orientation, use the provided 3/8” x 1”
stainless steel bolt, flat washer and lock washer to attach - do not over tighten.