USE
Device overview
1 - Function key (On/Off)
2 - USB-C In/Out (PD)
3 - USB-A Out (QC)
4 - Status LED
Operation
Function key (On/Off)
If the charging process dos not start automatically, you can start it manually by briefly pressing the function
key. You can stop the charging process and deactivate the Powerbank by briefly pressing the key twice.
LED Status display
The individual LEDs display the remaining energy of the Powerbank:
Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied USB-C cable to the USB-C port (USB-C In/Out) of the Powerbank; then connect
the other end of the USB cable to a USB-C power supply or to a USB-C port on your computer. The charging
process and current charging status will be indicated by the LED status lights. If the Powerbank is entirely
charged, the LED status lights remain illuminated. The required charging time of the Powerbank depends
on the selected charging source and the output power.
Normal charging:
Use a standard USB power supply or a USB port on a computer to charge the power bank via the USB-C Out/
In port (maximum 5V 3A = maximum 15 watts).
Fast charging:
To charge the power bank with a maximum power (20 watts), please use a power supply unit supporting
the Power Delivery Standard (PD). The fast charging is indicated by an LED as well which now lights up blue.
If the LED does not change from white to blue, your power supply unit or the cable used are incompatible
with the PD standard and the power bank will be charged normally.
EN
- Page 4 of 6
LED light
% - Energy
LED 1
LED 2
LED 3
LED 4
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
1
2
3
4
