HP PCL Font Characteristics 6-27
NOTE:
When selecting fonts, the different
characteristics (symbol set, spacing, pitch, etc.)
are prioritized as shown in Table , with symbol
being the highest priority and typeface being the
lowest. The font selection priority is the same for
HPGL/2 as for PCL font selection.
Character Fill Mode (CF)
The character fill mode command specifies the way scalable fonts are filled and edged;
bitmap and Stick fonts cannot be edged and can be filled only with raster fill, shading, or
PCL cross-hatched patterns. Scalable characters may be filled with any of the fill patterns
specified by the FT command (shading, hatching, cross-hatch, and user-defined raster fill
patterns).
CF
fill mode
[,
edge pen
[
;
] ] or CF [
;
]
Table 6-23 Character Fill Mode Command Parameters
Parameter
Format
Functional Range
Default
fill mode
clamped integer
0, 1, 2, or 3
0 (solid fill)
edge pen
integer
-(2)
30
to 2
30
– 1
0 (no edging)
No parameters - Defaults characters to solid fill with no edging. Equivalent to (CF0,0).
Fill mode - Specifies how the printer renders filled characters according to the following
parameter values:
0: Specifies solid f using the current pen and edging with the specified pen (or
current pen if the edge pen parameter is not specified).
1: Specifies edging with the specified pen (or current pen if the edge pen
parameter is not specified). Characters are filled only if they cannot be edged
(bitmap or stick characters) using the edge pen.
2: Specifies filled characters using the current fill type (refer to the FT command
in Section 9. The currently selected pen is used. Characters are not edged. If the
edge pen parameter is specified, it is ignored.
3: Specifies filled characters using the current fill type (refer to the FT command
in Section 9. The currently selected pen is used. Characters are edged with the
specified pen (or current pen if the edge pen parameter is not specified).
Содержание Intellibar M412
Страница 115: ...9 2 HP PCL Graphics Commands Figure 9 1 Star Shaped Raster Image...
Страница 122: ...HP PCL Graphics Commands 9 9 Figure 9 4 Example of Raster Graphic Image Data...
Страница 126: ...HP PCL Graphics Commands 9 13 Figure 9 6 Shading Levels...
Страница 127: ...9 14 HP PCL Graphics Commands Figure 9 7 Fill Patterns...
