IntelliTech Intellibar M412, Справочное руководство

Страница: 166 / 187

HP PCL Graphics Commands 9-53
Replot (RP)
This command is ignored by the printer; to eject a page, the printer must be in the PCL
printer language mode. The following commands cause a conditional page eject, meaning
that a page is ejected if there is any printable data in the print buffer:

ESC E (reset)

UEL (Universal Exit Language)

Flush All Pages

Page Length

Page Size

Orientation

Paper Source
The PCL Form Feed control code causes an unconditional page eject and advances the
current active cursor position to the top of form on the next page.
A page eject caused by any of the above commands except paper source defaults the
HPGL/2 pen position.
To print more than one plot, use the Number of Copies command described in Section 3.
*
"This information is subject to change without notice. This information is provided "as is" without either express or
implied warranty. IntelliTech International, Inc. disclaims any and all warranties with regard to this information.
IntelliTech shall not be liable in any event for any special, indirect or consequential damages or any damages whatsoever
resulting from loss of data, profits or use, for any reason or in any action, arising out of or in connection with the use or
performance of this information. "