Battery Installation/Replacement:
If the illuminated lens appears to be dim or does not light at all this is an indication that your batteries need to be replaced.
1. Remove the Timer from its Mounting Bracket by sliding it up and out of the bracket.
2. Pull up on the battery compartment housing tab on the back of unit to open the battery compartment.
3. Remove the old batteries (if replacing).
4. Insert 3 new AAA batteries. Be sure to match the battery polarity guide when installing new batteries.
5. Replace the battery compartment cover.
Battery Precautions
1. Use only the size and type of batteries specified.
2. Always purchase the correct size and grade of battery most suitable for the intended use.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
4. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.
5. Replace all batteries of a set at the same time. Do not mix old and new batteries.
6. Clean the battery contacts and also those of the device prior to battery installation.
7. Do not dispose of batteries in fire.
8. Remove batteries if consumed or if product is to be left unused for an extended period of time.
042011
© 2011 Lancer & Loader Group LLC. All rights reserved. Custom manufactured in China for Lancer and Loader Group LLC, New York, NY 10016.
B
AT
TER
Y
B
AT
TER
Y
B
AT
TER
Y
Customer Service
Answers to the most commonly asked questions can be found at www.lancerandloader.com
Limited 2 Year Warranty
If you recently purchased the item the quickest option is to return the product to the retailer where the item was purchased. Return policies vary by retailer.
If returning the item to the retailer is not possible visit www.lancerandloader.com for warranty details and directions on how to have the product repaired
or replaced.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Modifications to this product not approved by the party responsible for compliance could void the user’s authority
to operate the product.
LPL822 Manual.indd 3
4/20/11 11:11:18 AM