Function Operation Guide
Basic Operation
1.
Set the power switch (POWER) on the main unit ON.
2.
Select the event (F01 to F11) to use by
on the infrared remote control.
3.
Reset by
, and enable by
.
4.
Set/operate each event.
* Numbers can be fast forwarded by holding down the buttons for at least two seconds during setting/operation.
* The four buzzer sounds and mute can be selected by pressing
.
“
Snd1
” → “
Snd2
” → “
Snd3
” → “
Snd4
” → “
Snd-
”
The buzzer sounds for the duration that
is held down.
* The display can be switched ON/OFF by pressing
.
* Set the channels of the infrared remote control and the main unit. (Total 6 channels)
How to Set the Infrared Remote Control
5. Set the channel of the main unit by
.
Each press of
switches the display panel “
CH 0
” → “
CH 1
” → “
CH 2
” → “
CH 3
” → “
CH 4
” →
“
CH 5
” → “
CH 6
” → “
CH 0
” → “
CH 1
” and so forth.
* The default setting is “
CH 0
”. By setting “
CH 0
”, the remote control can receive all channels.
* This operation cannot be performed while the timer is operating or being set.
6. Set the channel of the infrared remote control by
to
.
* The default setting is “1”.
* On the infrared remote control body, which channel is currently set cannot be known.
Check operation together with operation of the main unit.
* Before use, be sure to check that the channels of the main unit and infrared remote control are matching.
Clearing Settings
•
To clear the settings of the current event, press
and then hold down
for at least two
seconds.
•
To clear the settings of all events, press
and then hold down
for at least two seconds.
* This operation cannot be performed while the timer is operating or being set.
F01 Count-Down timer
(max. time setting 99 mins 59 secs, 1 sec or 1/10 sec display, setting of up to 9 warning buzzers)
Operation Procedure
Remote Control
Button Operation
Display
1. Switch to the setting mode
00:00
2. Enter the time setting (Ex: 10 mins 30 secs)
①
Enter minute’s digit, then move to second’s digit
10:00
②
Enter second’s digit
10:30
③
Apply the time setting, and move to warning buzzer time 1
b
00:00
1
3. Enter the warning buzzer time (Ex: 1 min 30 secs)
①
Enter minute’s digit, then move to second’s digit
b
01:00
1
②
Enter second’s digit
b
01:30
1
③
Apply the warning buzzer time 1, and move to warning
buzzer time 2
b
00:00
2
④
If necessary, enter the warning buzzer time 2 and on-
wards by repeating steps
①
to
③
When “00:00” is entered for the warning buzzer time,
warning buzzers from then on are canceled, and the
screen returns to the time setting entry screen.
10:30
4. End setting, and switch to the timer mode
10:30
5. Timer
start
10:30
6. Change the time (Ex: 6 minutes 17 seconds → 7 min-
utes 32 seconds)
①
Timer stop
6:17
②
Change minute’s digit
Left score
7:17
③
Change second’s digit
Right score
7:32
7. Timer start (resume)
7:32
8. Match to warning buzzer time 1
1:30
(buzzer)
9. Timer
end
0
(buzzer)
10. Return to before start
10:30
* To switch to the setting mode, press
to reset the mode, and then press
.
* To enable 1/10 sec display, press
while in the setting mode. Pressing this again returns the display to 1 sec display.
F02 Count-Up timer
(max. time setting 99 mins 59 secs, 1 sec or 1/10 sec display, setting of up to 9 warning buzzers)
Operation Procedure
Remote Control
Button Operation
Display
1. Switch to the setting mode
00:00
2. Enter the time (Ex: 10 mins 30 secs)
①
Enter minute’s digit, then move to second’s digit
10:00
②
Enter second’s digit
10:30
③
Apply the time setting, and move to warning buzzer time 1
b
00:00
1
Operation Procedure
Remote Control
Button Operation
Display
3. Enter the warning buzzer time (Ex: 45 secs)
①
Enter minute’s digit, then move to second’s digit
b
00:00
1
②
Enter second’s digit
b
00:45
1
③
Apply the warning buzzer time 1, and move to warning
buzzer time 2
b
00:00
2
④
If necessary, enter the warning buzzer time 2 and on-
wards by repeating steps
①
to
③
When
“00:00”
is
entered
for
the
warning
buzzer
time,
warning buzzers from then on are canceled, and the
screen returned to the time setting entry screen.
10:30
4. End setting, and switch to the timer mode
0
5. Timer
start
0
6. Change the time (Ex: 25 seconds → 20 seconds)
①
Timer stop
25
②
Change seconds
Right score
20
7. Timer start (resume)
20
8. Match to warning buzzer time 1
45
(buzzer)
9. Timer
end
10:30
(buzzer)
10. Return to before start
0
* To switch to the setting mode, press
to reset the mode, and then press
.
* To enable 1/10 sec display, press
while in the setting mode. Pressing this again returns the display to 1 sec display.
F03 Stopwatch
(max. measurement time 9 hours 59 mins 59 secs 9, lap/split display switching)
Operation Procedure
Remote Control
Button Operation
Display
1. Switch the lap/split display
Bottom right●No: Lap
Bottom right●Yes: Split
2. Timer
start
0:00
1
3. Timer
stop
0:18
5
4. Return to before start
0:00
0
Split time (time elapsed midway)
Operation Procedure
Remote Control
Button Operation
Display
1. Timer
start
0:00
1
2. Split measurement (Ex: 26 mins 13 secs 7)
26:13
7
◀▶
blinks
3. Cancel
split
28:32
6
◀▶
goes out
4. Timer
stop
2
20:23
5
5. Return to before start
0:00 0
Lap time (interval time)
Operation Procedure
Remote Control
Button Operation
Display
1. Timer
start
0:00
1
2. 1st lap measurement (Ex: 26 mins 13 secs 7)
26:13
7
◀▶
blinks
3. Cancel 1st lap
28:32
6
◀▶
goes out
4. 2nd lap measurement (Ex: 23 mins 9 secs 2)
23:09
2
◀▶
blinks
5. Cancel 2nd lap
1
02:21
5
◀▶
goes out
6. Timer
stop
2
20:23
5
7. Return to before start
0:00
0
[Split Time/Lap Time]
Goal
Split 2
Split 1
Split time = time elapsed midway
Lap time = interval time
Start
Lap 1
Lap 2
Lap 3
Split 3
F04 Programmable timer
(max. time setting 99 mins 59 secs, max. 9 program settings, max. setting repeat count 99 times)
Operation Procedure
Remote Control
Button Operation
Display
1. Switch to the setting mode
P
00:00
1
2. Enter program 1 (P1) (Ex: 5 mins 30 secs)
①
Enter minute’s digit, then move to second’s digit
P
05:00
1
②
Enter second’s digit
P
05:30
1
③
Apply program 1 (P1), and move to program 2 (P2)
P
00:00
2
3. Enter program 2 (P2) (Ex: 3 mins 20 secs)
①
Enter minute’s digit, then move to second’s digit
P
03:00
2
②
Enter second’s digit
P
03:20
2
③
Apply program 2 (P2), and move to program 3 (P3)
P
00:00
3
