26
BLC: Set back light compensation, valid when it is auto status (default is off).
Anti-flicker: Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority (default 50Hz, closed, 60Hz
optional).
Gain limit: set the gain limits, auto, active when it is status of aperture or brightness priority (default 3, 0-15 optional).
b)
Dynamic range: set the dynamic range (default 5, off, 0-8 optional).
c)
Shutter speed: active when it is status of manual or shutter-priority (default 1/100
，
1/25
、
1/30
、
1/50
、
1/60
、
1/90
、
1/100
、
1/120
、
1/180
、
1/250
、
1/350
、
1/500
、
1/1000
、
1/2000
、
1/3000
、
1/4000
、
1/6000
、
1/10000 optional).
d)
Aperture value: Set the aperture value, active when it is status of manual or aperture-priority (default F1.8, closed, F11
、
F9.6
、
F8.0
、
F6.8
、
F5.6
、
F4.8
、
F4.0
、
F3.4
、
F2.8
、
F2.4
、
F2.0
、
F1.8 optional).
e)
Brightness: Set the brightness value, active when it is a state of brightness priority (default 7, 0-23 optional).
f) Color:
White balance modes: Set the white balance mode (the default automatic, 3000K, 4000K, 5000K, 6500K, manual, One-push
optional).Note: Click the “Correction” button when selected the One-push white balance mode.
Red Gain: Set the red gain, effective when it is manual (default 255, 0-255 optional).
Blue Gain: Sets the Blue gain, effective when it is manual (default 199, 0-255 optional).
Saturation: Set the saturation (default 80%, 60%, 70%, 80%, 90%, 100%, 110%, 120%, 130%, optional).
Color: Set the chrome (default 7, 0-14 optional).
Auto white balance Sensitivity: Sensitivity Auto white balance settings (default is low, high, medium optional).
Red Gain. Set Red Gain. Only effective when white balance mode is manual (default 255, 0~255 optional)
Blue Gain. Set Blue Gain. Only effective when white balance mode is manual (default 255, 0~255 optional)
g) Image:
Brightness: Set the brightness (default 6, 0-14 optional).
Contrast: set the contrast (default 8, 0-14 optional).
Sharpness: Sets the sharpness value (default 7, 0-15 optional).
Black and white mode: Set black and white mode (default color, black/white optional).
Gamma: Gamma value setting (default, 0.45, 0.50, 0.52, 0.55 optional).
Flip Horizontal: Set Flip Horizontal (default Off, On optional).
Flip Vertical: Set vertical flip (default Off, On optional).
h) Noise Reduction:
2D Noise Reduction: Set 2D noise reduction level (default Auto, 1-7 and Off optional).
3D Noise Reduction: Set 3D noise reduction level (default 5, 1-8 and Off optional).
Dynamic dead pixel correction: Set Dynamic dead pixel correction (default Off, 1-8 optional).
Note
: Click the “Refresh “to make revision of the a, b, c, d values become effective in the video.
1) Character-Overlapping
a)
Display date and time: Set whether to display the time and date (default display).
B) Show Title: Set whether to display the title (default display).
C) Time font color: Set the time and date font color (default white, black, yellow, red, blue optional).
D) Title font color: Set the title font color (default white, black, yellow, red, blue optional).
E) Moving characters: Set the date, time and title display position, click on the "up, down, left, right" buttons to move the
corresponding character position.
F) Title Content: Set title content (default CAMERA1).
G) Time Content: Set time content (default 1970/01/10 05:36:00)
H) Click on the "Save" button and display the "Save successful" message, then valid
2) Character Size
a)
Main stream character size: Set the character size of the display, the device will restart automatically after changed and saved
(default 24, 24, 16 optional)
b)
Secondary stream character size: Set the character size of the display, the device will restart automatically after changed and saved
(default 16, 24, 16 optional)
Click on the "Save" button to display "Parameter saved successfully" message, set to take effect
3) Video output
a)
Output mFormat: Set the video output format (default 1080P60, 1080P50, 1080P30, 1080P25, 1080I60, 1080I50, 720P60 720P50,
720P30, 720P25, 1080P59. 94, 1080I59. 94, 1080P29. 97, 720P59. 94, 720P29. 97 optional).
b)
Click on the "Save" button to display the "Save successful" message, then valid.
Note
: Model IT-FHDCC21-S20/T20 support up to P30 video formats.
