Intellisystem IT-600-IPC Series, Руководство пользователя

Страница: 124 / 131

119
Notice:
a.
Don’t input any power into the “DC12/2A OUTPUT” port of the tester.
b. Man-made damage is not within our company’s warranty.
c.
The IP tester ’s power output capacity is 2A. If the IP camera uses more than 2A, the tester will
automatically enter a protection mode.
d. Disconnect all cables from the tester and reboot it to resume using the tester.
The IPC tester power output is close to 2A, if the IP camera’s power is over 2V, the tester will
auto enter protection mode. Disconnect all the connections of the tester and then connect the
tester with power adaptor to resume the tester.
e. Make sure the tester has a sufficient charge otherwise the tester will not able to provide enough
output power.
3.8 USB 5V 2A power output
When the tester is turned on, the DC 12V and DC 5V power output functions are automatically turned
on. If the IP tester is turned off, the DC 5VUSB can still be used to power an external USB device.
NOTE: The USB port is for power only and not data.
4. Specifications