IntelliSense SECURIT 900C, Руководство пользователя, Страница: 4 / 8

4
DISARMING THE SYSTEM
Enter the protected area by the authorised entry route. A single
continuous tone will be heard from any internal speakers and from
keypads. Proceed directly to the keypad and enter your user code.
The system will disarm.
While the panel is in Alarm
Go directly to the keypad and insert your user code, the system
will disarm and the sounders stop, the zone/s will light on the
control panel to indicate the cause of the alarm. Refer to page 7
to reset the alarm.
TAMPER FAULTS
The control panel has tamper circuits giving protection from
unauthorised tampering. If the tamper circuit is broken during the
unset period any internal speakers will activate and the tamper and
possibly a zone LED will illuminate. Proceed directly to the keypad
and enter your user code, the internal sounder will stop. Refer to
page 7 to reset the alarm. After reset, if the tamper light remains on
then the cause of the tamper condition is still present. Refer to fault
clearing on page 7.
PERSONAL ATTACK
If your system has a personal attack button fitted this will be linked
into the alarm system as a 24hr device. The PA button will be
active all the time. If the PA button is pressed, all the sounders will
operate and the zone programmed as PA will indicate on the
keypad. Enter your user code, the sounders will stop. Go to the
personal attack button(s) and reset with the special key provided.
Refer to page 7 to reset the alarm. If the light remains on refer to
fault clearing on page 7.
Note: If the panel is armed and a PA is activated, you will need to
disarm the system as explained above.
Personal Attack from remote keypad
If the Alarm Company has programmed personal attack on the
keypads, pressing and holding the * and # keys together for 3
seconds activates the system as if a PA button was pressed. The
only difference is that the LEDs will scroll. Entering the user
code will stop the sounders. Refer to page 7 to reset the alarm.
DISARMING
THE SYSTEM
WHILE PANEL
IS IN ALARM
TAMPER
FAULTS
PERSONAL
ATTACK
PERSONAL
ATTACK
FROM
REMOTE
KEYPAD