IntelliQuip TOUGHPOWER TP-1000, Руководство пользователя

Страница: 18 / 35

●
BULK:
​
In this stage (full constant-current) the charger charges the battery with a constant current.
This constant current stage occurs for battery voltages between 70% to 98% (typical) of the voltage
limit
​ ​
provided
​ ​
in
​ ​
the
​ ​​
Charging
​ ​
Voltage
​ ​
Limits
​​ ​
section
​ ​
below.
●
ABSORPTION:
​
In this stage (constant-voltage) the charger charges the battery with a configured
constant voltage. This constant voltage stage occurs for battery voltages above 98% (typical) of the
voltage
​ ​
limit
​ ​
described
​ ​
in
​ ​​
Charging
​ ​
Voltage
​ ​
Limits
​​ ​
section
​ ​
below.
●
FLOAT: In this stage, the charger charges the battery with a reduced constant voltage.
​
Note:
​
This
stage
​ ​
is
​ ​
not
​ ​
applicable
​ ​
for
​ ​
Lithium
​ ​
LiFePO4
​ ​
batteries.
●
FULL:
​​ ​
Charger
​ ​
disabled,
​ ​
charging
​ ​
complete.
7.8
​ ​​ ​
Charging
​ ​
Voltage
​ ​
Limits
The Battery Charger applies the appropriate Charging and Float Voltages depending on the Battery Type as
well
​ ​
as
​ ​
combining
​ ​
automatic
​ ​
Temperature
​ ​
Compensation.
Battery
Type
Charging
Voltage
​ ​
(V
​
DC
​
)
​ ​
at
25
​
° ​
c
Float
Voltage
​ ​
(V
​
DC
​
)
​ ​
at
25
​
° ​
c
LEAD/GEL 14.2 13.3
CALCIUM 15.3 13.3
AGM 14.6 13.3
LITHIUM
​ ​
LiFePO4 14.6 N/A
Note:
​​ ​
For
​
​ ​
Lithium
​ ​
LiFePO4
​​
​
batteries
​ ​
there
​ ​
is
​ ​
no
​ ​
FLOAT
​ ​
stage.
7.9
​ ​​ ​
Charging
​ ​
Complete
When
​ ​
charging
​ ​
finishes
​ ​
the
​ ​
HOME
​ ​
screen
​ ​
will
​ ​
show
​ ​
the
​ ​
charging
​ ​
source
​ ​
with
​ ​
a
​ ​
FULL
​ ​
message.
​ ​
At
​ ​
this
​ ​
point
the
​ ​
Battery
​ ​
Charger
​ ​
will
​ ​
automatically
​ ​
shut
​ ​
off
​ ​
and
​ ​
there
​ ​
is
​ ​
no
​ ​
risk
​ ​
of
​ ​
overcharging
​ ​
the
​ ​
battery.
Page
​ ​
18