Intellipure 950P, Руководство по эксплуатации

Страница: 9 / 16

Intellipure 950P
9
System Operation
POWER ON /OFF
1. When unit is plugged in, control goes through self-diagnosis and then returns to the last setting before power was lost.
2. When unit is off (and plugged in), only the power button is dimly lit.
SPEED CONTROL
1. When unit is turned on, Power Button, Speed Bar, DFS and Filter Lights will be illuminated white.
2. Touch the fan speed bar to increase or decrease fan speed by increments of four.
3. For fine-tuning Speed:
a. Touch the small fan symbol (button b in On-board Touch Pad Diagram) to decrease fan speed by 2 increments.
b. Touch the large fan symbol (button d in On-board Touch Pad Diagram) to increase fan speed by 2 increments.
SLEEP MODE
1. Adjust to desired speed for Sleep Mode. Press & hold Sleep Mode Button for 5 seconds to activate Sleep Mode.
2. When Sleep Mode is activated, the whole user interface will dim to low. Only the Power Button and Sleep Mode Button
are lit. The unit will remain running at the speed set before Sleep Mode was activated.
3. To deactivate Sleep Mode, touch anywhere in the speed bar.
TURBO MODE
1. Touch Turbo Mode button to activate Turbo Mode.
2. When activated, all buttons on the On-board Touch Pad are illuminated white.
3. To deactivate Turbo Mode, touch anywhere in the speed bar.
FILTER INDICATOR 1/2/3
1. When unit is operating properly, the filter indicators are illuminated white.
2. When filter lifespan has been reached, filter indicator goes out and change filter indicator turns red.
3. Filter light can be reset by holding the respective filter light button for 5 seconds. When filter indicator quickly flashes
6 times, the timer is successfully reset.
DFS INDICATOR
1. When unit is on and DFS is operating properly, the indicator lit in white.
2. When DFS needs maintenance, DFS will automatically turn off. When DFS is turned off, indicator turns RED.
3. DFS can be activated / deactivated by touching DFS button. When DFS is deactivated, the DFS indicator turns off and
DFS deactivation indicator turns red.