High-Power Ceiling Mount Wireless 300N PoE Access Point
13
System log buffer size:
The default value is 16 kiB (kibibyte, or kilobyte).
Once that buffer is used up, the log will be
overwritten. You can assign a larger value here, but
be mindful of the total available memory of your
system.
External system log server:
Syslog is a client/server protocol. The Syslog
sender (the access point) sends a small (less than
1KB) textual message to the Syslog server. Enter
the IP address of your Syslog server here.
External system log server port:
The standard port for Syslog servers is 514. You can make adjustments to that value here, if necessary.
Log Output level:
You can define, how much information you want to include in the log file. “Debug” creates messages
about virtually everything that is going on whereas “Emergency” only logs messages of the utmost
importance.
Cron Log Level:
This parameter controls the log level for the kernel log.
3.4.2
Administration (Changing of Administrator Password)
On this page you can change the
administrator password for the web
interface. Provide a new password, and
repeat it in the confirmation field.
