Intellinet 523769, Руководство пользователя

Страница: 14 / 48

Port No.: In the settings panel at the bottom of the screen, use the “enter” and “Tab” keys to
position the cursor in the desired field and enter whichever port number you want to configure.
Name: The name assigned to a port for keeping records of the connections.
Type: The type of a port connector (fiber or RJ-45).
Admin:
Enable or disable the admin configurations.
Auto:
enable or disable the Auto-negotiation on the copper ports.
Speed: Presents the speed of ports in operation. You can also set the speed (10 – 100 Mbps) for
the RJ-45 ports.
Duplex: Presents the duplex status. You can also select the duplex mode (half or full).
Link: Presents the link status of a port.
Flow Control: Enable or disable the RJ-45 ports.
4.2.3.2 bridge Menu
This menu is used to enable/disable STP (Spanning
Tree Protocol Algorithm), Jet Ring or Xpress Ring,
and to configure the STP settings if STP is enabled.
If Jet Ring is enabled, it offers a fast recovery time of
less than 300 ms in case a node goes down in the
ring. Xpress Ring offers a very fast recovery time of
less than 50 ms. The Spanning Tree algorithm is
used for detecting and disabling network loops, and
for providing backup links between switches, bridges
and routers. This allows the switch to communicate
and interact with other bridging devices (that is,
STA-compliant devices) in a network to ensure that
only one route exists between any two stations, and to provide redundant or backup links that
automatically take over when a primary link fails.
4.2.3.2.1 E
nablE
/D
isablE
sTP, J
ET
R
ing oR
X
PREss
R
ing
Choose an option — by scrolling with the space bar, by
selecting with the “enter” key and by canceling with the
“esc(ape)” key — and then set its parameters based on
network needs. The default setting is “disabled.”
Press the “Tab” key to move through and highlight options;
press the “Enter” key to select/unselect or to exit a field;
press the “esc(ape)” key to return to the main menu. Save
after editing; unsaved configurations will return to default
values or the most recent saved values.
Ports 1 – 8 STP: When enabled (Y), the port participates in
the STP algorithm execution of the switch when 802.D is
selected. When disabled (–), the port does not participate.
4.2.3.2.2 s
ysTEm
C
onfiguRaTion
Use this option to configure the STP parameters. Before moving to this menu, however, make
sure the “802.1d” mode is selected when enabling or disabling (enable/disable) the STP, Jet
Ring or Xpress Ring modes. Otherwise, the values can’t be configured. On the left side of the
window, the root bridge information is displayed.
14
CONFIGURATION