Intellinet 502566 Скачать руководство пользователя

Страница: 37 / 40

playing games or using these voice applications, it is recommended that

Gaming Mode be disabled.
PPTP: Enables the user to set up PPTP access for remote management.
IPSec: Enables the user to set up IPSec access for remote management.
IDENT: The default is Stealth. This enables the user to set port 113 to Stealth.

Tools

This page enables the user to restart the system; save and load different

settings as proﬁles; restore factory default settings; run a Setup Wizard to

conﬁgure router settings; upgrade the ﬁrmware; and ping remote IP addresses.

Restart

Click “Restart” to restart

the system in the event the

system is not performing

correctly.

Settings

This screen enables user to save settings as a proﬁle and load proﬁles for

different circumstances. The user can also load the factory default settings, and

run a Setup Wizard to conﬁgure the router and router interface.
Save Settings: Click

“Save” to save the current

conﬁguration as a proﬁle

that can load when

necessary.
Load Settings: Click

“Browse” and go to the

location of a stored

proﬁle. Click “Load” to

load the proﬁle’s settings.
Restore Factory Default Settings: Click “Restore” to restore the default settings.

All conﬁguration changes will be lost.

Firmware

This screen enables the user to keep the router ﬁrmware up to date. Follow the

instructions below.
Download the latest ﬁrmware from the manufacturer’s Web site, and save it to

disk.
Click “Browse” and go to the location of the downloaded ﬁrmware ﬁle.

CONFIGURATION

Содержание 502566









































Результаты поиска

Содержание 502566

Отзывы:

Похожие инструкции для 502566

Бренды по названию

Популярные бренды

Intellinet 502566, Руководство пользователя

Результаты поиска

Содержание 502566

Отзывы:

Похожие инструкции для 502566

Бренды по названию

Популярные бренды