Intellimeter I-METER 45, Инструкция по установке и эксплуатации, Страница: 15 / 22

Page 15
Intellimeter Canada Inc.
1125 Squires Beach Road, Pickering, ON, L1W 3T9 • Tel: (905) 839-9199
Copyright 2019 © i-meter 45 Manual
3. i-meter®45 METER DISPLAY MODULE (MDU DISPLAY)
The Meter Display Module (i-meter®45 MDU) displays customer information, real time measurements,
total energy consumption, and power quality of each customer by using the key pad “UP”, “DOWN” and
“SELECT”.
i-meter®45 MDU Display
4. i-meter®45 MODBUS MODULE
The i-meter®45 ModBus module enables the meter to communicate on a ModBus system. It presents
real time measurements, such as voltage, current, THD etc. The normal mode of the module supports
RTU ModBus communication over an RS-485 network. Within 30 seconds of power up, the module will
enter the normal mode of operation that supports ModBus communication. By default, the module
communicates at 9600 bps, 8 data bits, no parity and 1 stop bit (8N1). The communication parameters
and ModBus ID may be changed through the ModBus registers or through the Recovery Mode.