µVCF
Manual
Front Panel
Controls
1.
FREQ -
Sets the cutoff frequency of the filter. The knob
position is combined with the FM1 and FM2 inputs.
2. Q - Sets the resonance of the filter.
3. FM2 - Controls the amount and polarity of the FM2 input.
The input passes unmodified when the knob is fully
clockwise, inverted when fully counter-clockwise, and
has no effect when at the 12 o’clock position.
4. Input Attenuator - Attenuates the level of the filter input
signal. The signal is unattenuated when the knob is fully
clockwise.
5. FM1 Attenuator - Attenuates the control voltage of the
FM1 input. When fully clockwise the input is
unattenuated and tracks 1V / octave.
Inputs and Outputs
A. INPUT - Audio input to the filter.
B. FM1 - CV input for the cutoff frequency. Attenuation is
controlled by the FM1 Attenuator.
C.
LPF - 2-pole (12 dB / octave) lowpass filter output.
D. FM2 - Another CV input for the cutoff frequency.
Attenuation / inversion is controlled by the FM2 knob.
E. BPF - 1-pole (12 dB / oct) bandpass filter output.
F. HPF - 2-pole (12 dB / oct) highpass filter output.
Page 6
