Intellijel MIDI1U, Руководство пользователя

Страница: 36 / 42

Output Type The selection made here determines the type of data
transmitted out the corresponding CVx jack. The selection
impacts the availability of other jack parameters.
Clock (Always) The jack outputs a clock signal. When “Clock (Always)” is
selected, a dedicated
Clock Division parameter
materializes, with which you set the rate. The clock is
output whether or not the incoming MIDI clock is running
(using the most recently received clock value, if it’s not).
Clock (Running) As with “Clock (Always),” the jack outputs a divided clock
signal, but only when a MIDI clock is being received.
Reset The jack outputs a trigger signal whenever a MIDI RESET
message is received.
Run The jack outputs a run gate that stays high (5V) for as long
as the external MIDI clock is running. Stopping the external
MIDI clock sets the gate low (0V).
CC Number The jack outputs a control voltage derived from the
selected MIDI
CC Number arriving on the MIDI Channel
used by the selected Synth . Voltage polarity is selected
with the CV Polarity option.
CC Number
(High Res) The jack outputs a control voltage derived from the
selected MIDI
CC Number arriving on the MIDI Channel
used by the selected Synth . Voltage polarity is selected
with the CV Polarity option. This allows fine-control of
voltages from any external DAW or MIDI Device capable of
transmitting them.
NOTE: Ableton Live users who wish to take advantage of
MIDI 1U’s 14-bit control capabilities can download
Intellijel’s free “High-Res CC” Max for Live plugin from the
Intellijel website.
Pressure
(Aftertouch) The jack outputs a voltage derived from Channel
Aftertouch messages arriving on the
MIDI Channel used
by the selected Synth .
Pitch The jack outputs a 1V/oct pitch signal with a range of ±5V.
The actual pitch is determined by the note value received
on the
MIDI Channel used by the selected Synth , plus any
additional pitch bend. Pitch Bend Range, Coarse Tuning,
and Note Priority are all set per-synth in the
Synths
Column .
Gate The jack outputs a gate signal, which is high (5V) for as
long as a note is being held on the
MIDI Channel used by
the selected Synth .
MIDI 1U System Manual 35