Run
The jack outputs a run gate that stays high (5V) for as long as
the external MIDI clock is running. Stopping the external MIDI
clock sets the gate low (0V).
CC Number
The jack outputs a control voltage derived from the MIDI CC #
selected in the
CC Number
menu on the
MIDI Channel
assigned to
synth 1
. Voltage polarity is selected by the
CV Polarity
parameter.
CC Number
(High Res)
The jack outputs a control voltage derived from the High Res
MIDI CC # selected in the
CC Number
menu on the
MIDI Channel
assigned to
synth 1
. Voltage polarity is
selected in the
CV Polarity
menu. This allows fine-control of
voltages from any external DAW or MIDI Device capable of
transmitting them.
NOTE: Ableton Live users who wish to take advantage of
MIDI 1U’s 14-bit control capabilities can download Intellijel’s
free “High-Res CC” Max for Live plugin from the Intellijel
website.
Pressure
(Aftertouch)
The jack outputs a voltage derived from Channel Aftertouch
on the
MIDI Channel
assigned to
synth 1
.
Pitch
The jack outputs a 1V/oct pitch output with a range of ±5V.
The actual pitch is determined by the note value received on
the
MIDI Channel
assigned to
synth 1
, plus any additional
pitch bend.
Gate
The jack outputs a gate signal, which is high (5V) for as long
as a note is being held on the
MIDI Channel
assigned to
synth 1
.
Trigger
The jack outputs a +5V trigger signal whenever a MIDI Note
On message is received on the
MIDI Channel
assigned to
synth 1
. By default, the Trigger length is 5ms, but you can
override this, per-channel, using the
Trigger Length
option
for
synth 1
.
Velocity
The jack outputs a velocity value with a range of 0-5V. The
voltage is proportional to the MIDI velocity received on the
MIDI Channel
assigned to
synth 1
.
MIDI 1U System Manual
28
