Connecting a MIDI Expander 1U
NOTE: The MIDI Expander 1U Module is not yet available. Once it is, these instructions will
be updated accordingly.
If you use the optional MIDI Expander 1U module, you will need to connect it to both power and to
the MIDI 1U module.
1.
Turn off power to your case.
2.
Connect the supplied 10-pin-to-16-pin power cable between the MIDI Expander 1U and one of
your case’ 16-pin power connectors (as discussed earlier in
Connecting Power to the MIDI 1U
3.
Connect one end of the supplied 6-pin to 6-pin ribbon cable to the 6-pin connector on the
MIDI 1U module. The connector is keyed, and will fit in only one direction.
4.
Connect the other end of the supplied 6-pin-to-6-pin ribbon cable to the 6-pin connector on the
MIDI Expander 1U. The connector is keyed, and will fit in only one direction.
5.
Power on the Case.
MIDI 1U System Manual
10
