Palette Case
B. Audio Jacks Connector
Use this 6-pin connector for attaching either a balanced audio input or balanced audio output
module to the ¼” TRS connectors on the top of the Palette. Specifically, you may connect:
●
Stereo Line Out 1U : Using
the cable provided with your
Stereo Line Out 1U module,
connect it to the Audio Jacks
Connector. Once connected,
Palette’s two TRS audio
jacks function as L/R audio
outputs for the Palette case.
●
Stereo Line In 1U : Using the
cable provided with your
Stereo Line In 1U module,
connect it to the Audio Jacks
Connector. Once connected,
Palette’s two TRS audio
jacks function as L/R audio
inputs for the Palette case.
NOTE: This module is not
yet available.
IMPORTANT : If you connect a module to the Audio Jacks Connector, you should not connect
a module to the Link Connector (described below). Since both connectors access the Audio
Jacks on your Palette case, unexpected results may occur.
C. MIDI Connector
Connect the cable included with your Intellijel µMIDI 1U module to this 10-pin connector to use
the Palette’s USB and
⅛
” TRS MIDI Jacks as MIDI inputs for the µMIDI 1U.
Page 8
