Palette Case
●
Pedal I/O 1U : This module, when connected to the Link Connector on the
,
sends an unbalanced line-level output to Jack 1, and returns an unbalanced live-level
input on Jack 2. Use this module to patch external effects or stomp boxes into your
Palette.
●
Mixup 3U : This module, when connected to the Link Connector on the
,
sends the unbalanced L/R stereo mix from the rear-panel output of Mixup directly to the
two ¼” jacks on Palette.
Important : You cannot connect multiple modules to these ¼” TRS jacks. Unexpected results
may occur if you attach multiple and competing audio jacks modules to the circuit board.
8. TRS Audio Jack 2
A second configurable ¼” Neturik TRS jack, which operates in conjunction with TRS Audio
Jack 1, described above.
9. 62 HP for mounting 1U modules
62 hp of mounting space for Intellijel format 1U modules.
10. 62 HP for mounting 3U modules
62 hp of mounting space for 3U modules up to a depth of 45.5mm. At each of the extreme
edges (occupying less than 1 hp) there is a depth of 37.42mm.
Page 6
