Intellihot iN199, Руководство по установке и эксплуатации

Страница: 9 / 78

5 iN199 Technical Specifications
Oct 2021 - Revision 01
3. Technical Specifications
3.1 Specifications Chart
Technical Data iN199 Specification
Type Indoor, Floor-Mounted
Fuel Preset for natural gas but convertible to propane
Minimum Input (BTUs/hour) 30,000
Maximum Input (BTUs/hour) 199,950
Maximum Output (BTUs/hour) 191,952
Thermal Efficiency 96%
Turn Down Ratio (TDR) 6.7:1
Water Inlet / Outlet Connection 1-1/2" NPT
Gas Inlet Connection 1-1/2" NPT (3/4" w/nipple)
Condensate Drain Connection 3/4" PVC
Maximum Condensate Flow Rate (GPM) 1.4
Unit dimensions H X W X D (inches) 67.5 X 20 X 20 (15.6 cu. ft)
Service Clearances 4" on the back, 6" on the top, 12" on the front, and 6" on the sides
Unit weight (lbs) 273
Shipping Crate Dimensions H X W X D / Weight 27 X 29.5 X 85 (Inches) / 373 (LBS)
Venting Type Direct Vent (2 pipe – air intake and exhaust gas outlet), Power Vent (1 pipe – exhaust gas only)
Venting Materials (USA) Sch. 40 PVC, Sch. 80 CPVC, Polypropylene, Stainless Steel (AL29-4C)
Venting Materials (Canada) Type BH Gas Vent Classes: II A (PVC), II B (CPVC), II C (Polypropylene), I (AL294C SS)
Venting Size (Diameter) 3"
Max 8" Vent Length – Single Pipe/Power Vent 195' *
Max 8" Vent Length – Two Pipe / Direct Vent 95' *
* Venting Note: From the maximum length above, deduct 5 ft. per 90° elbow and 2 ft. per 45° elbow.
Ignition Electronic Spark Ignition
Temperature Range 100°F – 190°F
Temperature Stability +/- 4°F (when on demand)
Installation Location Ambient Temperature 40°F – 130°F
Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue Temperature Monitor, Blocked Vent Detector, Dual
Flame Sensing
Water Pressure Min / Max (PSI) 30/150
NG/LP- Min. Static Gas Pressure (Full Fire) 2.5" WC (set regulators to 8" NC for NG or 11" for LP)
NG/LP - Maximum Static Gas Pressure 14" WC
Gas Pressure for Adjustments 8" WC for Natural Gas, 11" WC for Propane
Electrical 120V AC, 60 Hz
Power Consumption Max 9.5 Amps, 16W (Standby)
Internal Water Volume (gallons) 1
Features and Approvals iN199
Cascading Masterless, 4-Unit, Automatic Rotation
Common Venting Yes, Up to 4 Units
Heat Exchanger Expandable, Stainless 316L
Appliance Certication to ANSI Z21.10.3 ETL
SCAQMD (Pending) Ultra Low Nox (under 20 PPM)
Performance Specification
Hot Water Output (45°F Rise) 8.5
Hot Water Output (70°F Rise) 5.5
Hot Water Output (90°F Rise) 4.3
Hot Water Output (100°F Rise) 3.8
Hot Water Output (140°F Rise) 2.7
Warranty Heat Engine Coil - 6 years, All Other Parts - 1 year
Note: Due to continuous product improvements, the design and technical specifications are subject to change without notice.