Intelligent UFM-B, Руководство по обслуживанию, Страница: 11 / 43

10
2.4.3 Full Segment Display (F2)
a. Refer to the 2.4.1 on how to enter F2
b. All display segments will light up
c. Check all digits and arrow indications to verify any defects or
errors
d. Press TARE to quit
2.4.4 Span Value Reading/Configuration Setup (F3)
The UFM series is designed according to NTEP and Measurement Canada
requirements with maximum resolution legal for trade at 1/6000. It
is also approved for 1/3000 so users can choose the preferred resolution
depending on the working environment.
When type NTEP (legal for trade mode) is selected, the rated capacity
will be limited to maximum of 1/6000. When type normal (not legal for
trade mode) is selected, the rated capacity will be allowed for a maximum
of 1/30000. The indicator also provides option for dual intervals when
set.
TO ENTER FUNCTION
a. Refer to the 2.4.1 on how to enter F3
b. Press MODE to select tYPE (NTEP or normal), unit (metric only or
metric/imperial conversion support), dP (decimal point), CAP2
(capacity and readability), CAP1? (for dual interval, only allowed
when type is set in normal mode).
TO SET TYPE
(Select between NTEP and non NTEP application)
a. Press M+ when display shows tYPE and select the operating type
of ntEP or norm for normal
b. Press MODE to save and continue setup
TO SET WEIGHING UNIT
a. Press M+ when display shows unit and select the weighing unit of
kg , g , lb kg or lb g . When it is set kg or g only, scale will only
display result in metric form, but when set to lb kg or lb g , scale
will allow metric/imperial conversion
b. Press MODE to save and continue setup