DETAILS DISPLAYED ON LCD
BATTERY LEVEL INDICATOR :
The battery level is provided by percentage of battery
Charge corresponding to the number of bars and percentage displayed. The
segments in the battery level correspond to the current state of charge, 1-20%
one segment, 21-40% two segments, 41-60% three segments,61-80% four
segments, and all five are lit when charge level is above 81%.
Provides the user live telemetry data on time to completely charge, or deplete the
battery based upon the energy entering or leaving the battery.
Highly recommend to fully charge T-300 when first use. Higher battery level
indicator show, more precise the data will indicate.
PLEASE BE AWARE that this value can adjust multiple times as the energy draw
changes from the connected devices. This is evident during initial activation of
ports with a connected device.
RECOMMENDED back to charge the T-300 when battery indicate less than 20%.
Note that when you first plug in a power source, whether it's a solar panel or a wall
charger, the T-300 may take a minute to detect and adjust its charge circuitry
before it starts drawing power from the source.
INPUT Status :
The T-300 is capable of providing input energy in watts.
DC Output Status :
The display will provide output watts of the DC port.
AC Output Status :
The display will provide output watts of the AC port.
The output watts of USB port will NOT display on the LCD Screen.
Power-saving mode:
when the device enters the input or output state, it will enter the screen-off mode
after more than 20 seconds, which does not affect the normal operation of the
device. When the output power of the device is less than 5W, the device will go
into hibernation after more than 3 hours, and the input can be "awakened" when
the input is charged or any button is pressed. When not in use, press the switch
button to turn off the output.
OPERATING INSTRUCTIONS
CHARGING T-300
Connect the provided AC Wall power adapter to Input, and allow T-300 to fully
charge prior to use, approx. 5-7 hours.When charging, the LCD Screen will be
illuminated, and the LCD display will provide Battery level Indicator, T-300
is fully charged when the level is 100%. It is recommended to fully charge T-300
every 3 months to maintain the health of the battery pack.
7
