TROUBLE SHOOTING
MAINTENANCE AND WARRANTY
Maintenance
Check as needed. If the T300 energy storage power supply cannot be used
regularly, please charge and discharge it every 3 months under normal temperature
to keep the service life. Regularly check all ports and wall chargers for any debris,
dirt, damage, and corrosion.
Do not disassemble the device privately.
Do not cover the equipment with towels, clothes or other items. Regularly observe
the side vents for dust and foreign matter, and clean them according to the
cleaning procedures specified in the manual.
10
C
DISPOSAL/RECYCLING
Do not put the device and its accessories in the trash can. Items must be
properly handled in accordance with local laws and regulations.
For additional information, please see www.epa.gov.
AFFIRM
Copyrighted equipment. all rights reserved. All trademarks cited here are the
property of their respective owners. The information contained in this agreement
is subject to change without notice. The Intelligent Energy is not responsible for
technical or editorial errors or omissions contained in this agreement.
First edition: Aug. 2021.
We assure the original consumer purchaser that our products are free of defects
in workmanship and materials during the applicable warranty period determined
in the "Warranty Period" section below, subject to the exclusions set third below.
This warranty statement sets Intelligent Energy ’ s total and exclusive warranty
obligations. We will not assume, nor authorize any person to assume for us any
other liability related to the sale of our products.
The device does not discharge:
(1) Check whether the output buttons are activated ;
(2) Check whether the total output power exceeds the rated output power;
(3) Check whether the temperature of the equipment is too high.
The device can not be charged:
1
）
Confirm that the wall plug power adapter's cord is inserted fully into the DC Input.
2
）
Confirm that the AC wall plug power adapter is the charger provided with T300.
If the input does not comply with the requirements located in the general specifications
section, the low power range 0% to 10%may be displayed on the LCD.
3) If the device cannot be charged immediately after it is discharged, please wait for an
hour and try again, it may enter the over-temperature protection.
