Intelligent Energy Power Path Module Скачать руководство пользователя страница 4

7

6

Assembly and connection

Assembly and connection

5

5

5.1

5.3

5.2

Mechanical mounting of the Power Path Module

Ensure that the PPM is well secured to the UAV. It is recommended that the PPM is 
mounted using adhesive backed Velcro.

Electrical interfaces

The PPM has 11 electrical connections. These are summarised in the table below.

The PPM is supplied with cables to connect onto the UAV. The FCPMs should be 
connected using their supplied cables.

For more detail on Port 7 and 11 see Section 7.2.

Output UART (Port 3)

The communication port is in UART format. This should be fitted in flight to allow 
the fuel status and fault statuses to be viewed.

Socket: Manufacturer: JST; Part Number: S8B-ZR-SM4A-TF(LF)(SN)

Plug: Manufacturer: JST; Part Number: ZHR-8

Crimps: Manufacturer: JST; Part Number: SZH-002T-P0.5

Port number

Description

Connect to

When required

1

Output power connection

UAV power input

All cases

2

Output pressure 

Regulator control 

All cases

3

Output UART

To UAV controller

All cases

4

PPM SD card 

NA

All cases

5

Input power 
connection FCPM 1

FCPM 1 output

All cases

6

FCPM 1 UART

FCPM 1 UART

All cases

7

FCPM 1 pressure

FCPM 1 regulator interface

If this port is left empty 
for dual operation port 11 
must be used

8

Input power 
connection FCPM 2

FCPM 2 output

All cases

9

Intelligent Energy use only

NA

NA

10

FCPM 2 UART

FCPM 2 UART

All cases

11

FCPM 2 pressure

FCPM 2 regulator interface

If this port is left empty 
for dual operation port 7 
must be used

Pin number

Description

Comment

1

+3V3

Output Power Rail – not for use 
to power external circuits

 +3V3

2

UART TX

FCPM UART transmit line (TX) to 
connect to external receive (RX) line

 UART TX

3

UART RX

FCPM UART receive line (RX) to connect 
to external transmit (TX) line

 UART RX

4

Not used

Not currently used

N/A

5

Not used

Not currently used

N/A

6

Not used

Not currently used

N/A

7

Not used

Not currently used

N/A

8

GND

GND reference

– GND

 Warning

Ensure the correct polarity of the two FCPMs.

Do not connect more than one FCPM debug cable to a computer. 
The signals are not isolated. When the FCPMs are connected in series 
the ground levels will be different.

 Warning

Protect the PPM from direct water spray or water drips.

Содержание Power Path Module










Отзывы: